-
An iconic rendering of T'au technological progress and ingenuity, the XV8 Crisis Battlesuit is a thing of joy to behold in battle - unless you're its target. Skimming along on the jets of their repulsor engines, Crisis Battlesuits close on their enemy with a surprising speed, unloading their diverse weaponry and leaping away in a split second. Only the best T'au warriors are allowed to pilot these machines, spending years on the front line before even being considered for this honour. Able to be dropped from a planet's upper atmosphere, slamming into ranks of enemies like a tidal wave, the XV8 Crisis Battlesuit is the ultimate balance of firepower, speed and resilience. This multi-part plastic kit contains everything needed to build three XV8 Crisis Battlesuits, with six accompanying drones. There's an impressive level of customisation available, with ball fittings allowing unprecedented posability. One miniature can be optionally assembled as a Shas'vre, with special head and chest plate, and there's a prodigious amount of advanced T'au weaponry in the box: four plasma rifles, three flamers, four fusion blasters, four burst cannons, three missile pods and three shield generators. The accompanying drones have options for gun, shield or marker variants, and you can build a total of six drones, with up to three of any one type. The kit also includes an assortment of battlesuit electronics systems. One model in the kit can even be built as the new, experimental Iridium-class XV8-02 Crisis Battlesuit - distinguishable by its thicker armour and aggressive appearance. Huge variety! 152 components are included in total, with three Citadel 50mm Round bases and three Citadel small Flying bases. -
Primaris Techmarines stride selflessly through oncoming fire to soothe the machine spirits of wounded war engines, deftly peeling back damaged armour plates to repair burnt-out cabling and bending warped panels back into shape with their servo-arms and mechadendrites. Techmarines specialise in repairing tanks and war machines, so if you favour armoured warfare, never leave home without a Techmarine or two in order to keep them in tip-top shape! This kit builds one Primaris Techmarine. He is equipped with a grav-pistol, Omnissian power axe, servo-arm, mechadendrite, and a shoulder-mounted forge bolter. It is supplied in 24 plastic components and comes with a Citadel 40mm Round Base. -
The Leman Russ is the primary battle tank of the Imperial Guard, forming the spearhead of countless armoured columns. Those enemies that do not fall to the bombardment of their cannons and numerous hull-mounted guns are crushed mercilessly beneath their heavy treads. These reliable and formidable tanks can be found in nearly every Astra Militarum regiment in the galaxy, and have become synonymous with the Imperium's fury. This multipart plastic kit builds a Leman Russ Battle Tank – a versatile armoured vehicle with a wide range of variants. This tank can be built with one of seven powerful turret weapons – a battle cannon, demolisher battle cannon, eradicator nova cannon, executioner plasma cannon, exterminator autocannon, punisher gatling cannon, or vanquisher battle cannon – allowing you to arm your Leman Russ for busting open tanks, shredding alien swarms, or anything in between. It also sports a hull-mounted secondary weapon – a lascannon, heavy bolter, or heavy flamer – and can be equipped with two optional sponson-mounted guns – a pair of heavy bolters, heavy flamers, multi-meltas, or plasma cannons. The kit includes cosmetic options such as a searchlight, handles, and a choice of an exposed crewman or closed hatch. It can alternatively build a Tank Commander – a skilled squadron officer for the Astra Militarum, mounted in a Leman Russ. This kit comprises 150 plastic components and includes an Astra Militarum Vehicle Transfer Sheet, with 475 transfers featuring numerals, sigils, and a variety of regimental heraldry. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
A Sydonian Skatros is a sinister cybernetic sentinel, stoic and unmoving until the moment an enemy strays into range of their huge rifle. Mechanical, stilt-like limbs allow them to traverse hazardous terrain and survey the environment, shrouded by a smog of incense-exhaust. With protocol-driven precision and an advanced scanner known as the achillan eye, they lock on to their foes’ weakpoints and unleash pinpoint fire that sows panic and agony – all the better for eroding enemy morale. This multipart plastic kit builds one Sydonian Skatros, an augmented sniper created by the Adeptus Mechanicus. This Skitarii sharpshooter can be armed with one of two long-barrelled guns – a radium jezzail, which fires radioactive bullets that pierce armour and poison flesh, or a high-powered transuranic arquebus. Each weapon comes with its own bionic loader-arm, as well as an ammunition pack for the Skatros' belt, which sports a holstered pistol for closer foes. The kit also includes a choice of two different headset designs for the Skatros – a sinister mono-visor, or a pair of staring goggle-lenses – which can be worn over their cyborg facemask or pushed up onto their forehead. This kit comprises 21 plastic components, and comes with a Citadel 40mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
he Necrons are a deathless species of The Necrons are a deathless species of alien androids who dominated the galaxy in ages past. After millions of years in self-imposed slumber, they are rising from their hidden tomb complexes to march in conquest once more. Clad in self-repairing bodies of living metal, armed with weapons that harness the devastating energies of the cosmos, the Necrons are a terrifying enemy. They are without fear or mercy, soulless mechanoids who advance in eerie lockstep to lay down an annihilating storm.
These phalanxes are joined by techno-sorcerous war engines, scuttling constructs, and shards of shattered star gods, led to war by undying nobles with wills and bodies of unyielding metal, driven by the absolute conviction that they are the rightful rulers of the galaxy. Ravaged by their long sleep, many Necrons have been reduced to murderous monsters or delusional demigods. Yet their madness only makes them an even greater and more inescapable threat. Codex: Necrons is an essential guide for anyone who wants to collect Necrons and display the might of their phaeron on the tabletop. In this book you'll find the rules you need to play a Necrons army in games of Warhammer 40,000 – including narrative Crusade campaigns and Combat Patrol skirmishes – as well as detailed background material and stunning art showcasing their ancient origins, impossibly advanced technology, and dynastic courts. Inside this 136-page hardback book, you’ll find: – Terrifying background information exploring the awakened Necrons, from their unfathomably ancient history to the structure of the tyrannical dynasties – Stunning artwork that brings these undying legions and ancient tomb worlds to life (of a sort) – 47 datasheets detailing the profiles, wargear, and unique abilities of every Necrons unit, from mindless Necron Warriors to Imotekh the Stormlord – Five themed Detachments for Necrons armies, such as the Annihilation Legion and Canoptek Court, each with their own set of special rules – Crusade rules for steadily awakening the systems of your slumbering tomb world, earning ever-greater mechanical powers – Self-contained Combat Patrol rules and a painting guide, allowing you to play fast-paced games with Amonhotekh's Guard – An 'Eavy Metal showcase of superbly-painted Citadel miniatures to inspire you, featuring a variety of Necron dynasty colour schemes This book also contains a one-use code to unlock Codex: Necrons content in Warhammer 40,000: The App.READ LESS
-
Biovores are living artillery pieces, swollen with the clutch of explosive Spore Mines that they nurture within their bodies. Upon anchoring itself to the ground with chitinous spurs, a Biovore undergoes violent spasms that expel its volatile offspring in high arcs as living ammunition. From there, the gas-bloated Spore Mines detonate in a shower of bone shards and acid rain, or else drift languidly down onto the battlefield, primed to explode whenever prey draws near. This multipart plastic kit builds a Biovore – a sentient Tyranid mortar – as well as three floating Spore Mines. The Biovore's lumbering form supports a symbiotic dorsal launcher, its spore-sac bulging with biological explosives waiting to be fired. The Spore Mines can be launched onto the battlefield by the Biovore, or simply rain down from the skies. The kit offers several alternate leg poses and basing elements for the Biovore, as well as three distinct designs of Spore Mine, allowing you to maintain variety in your brood as you build a whole battery of artillery-beasts. The Biovore in this kit can alternatively be built as a Pyrovore, a fire-spewing Tyranid creature. This kit comprises 37 plastic components, and comes with a Citadel 80mm Round Base and 3x Citadel 25mm Round Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
Clonefather. Primogenitor. Spider. Fabius Bile has laboured under many epithets during his long and wicked life, but none truly convey the unrepentant evil of this heretic crypto-scientist. A twister of flesh and a sculptor of nightmares, Fabius Bile is one of the most abominable renegades to blight the Emperor's realm. In command of Fabius, you can unleash gene-spliced horrors upon an unsuspecting galaxy, bringing your enemies to their knees. Bile is also more than capable of taking care of himself too, carrying as he does the deadly Rod of Torment. He can be accompanied by a Surgeon Acolyte, who assists him in his twisted work. This pair make an excellent modelling or painting project and are an excellent addition to a Chaos Space Marines army. This 21-piece kit creates one Fabius Bile and one Surgeon Acolyte. It comes supplied with a 40mm Citadel round base and a 32mm Citadel round base. -
The Drukhari rely heavily on surprise and raw speed, and hence their skycraft are all fast and manoeuvrable. The most deft of all Commorite transports is the Venom, an arrow-swift skimmer that carries an elite cadre of warriors into battle to strike like a poisoned dart at the heart of the foe. Should even a single Venom penetrate the enemy defences it can be enough to sow the seeds of destruction, laying down supporting fire as its lethal cargo goes to work. For this reason, the Venom is the perfect transport vehicle for Archons, Succubi and their respective bodyguards. This multi-part plastic kit contains one Drukhari Venom in 62 components. The kit includes two Wyches that represent a unit being transported into battle, a third Wych firing the on-board splinter cannon and a clear plastic canopy, giving you the option to paint the pilot and still be able to see him once the kit is fully assembled. It is also supplied with a ball and socket flying stand and a large flying base. This miniature is supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints. -
Chaos Lords are the most powerful of the Chaos Space Marines. With the genetic advantages of a Space Marine and the blessings of the Dark Gods there are few more dangerous entities in the galaxy. This Lord is clad in Terminator armour and can be armed with a variety of weapons. This boxed set contains 1 multi-part plastic Chaos Space Marines Terminator Lord, and includes options for a Chaos Space marines Terminator Sorcerer, combi-weapons, power weapons and more. -
The Rhino is the most widely used armoured personnel carrier in the Imperium. Based on ancient STC technology, the fundamental design is robust, reliable, and easy to maintain, with an adaptive power plant that can run off a wide variety of fuels, making it perfect for the wide-ranging armies of the Great Crusade – and the wars of the Horus Heresy. As such, the Rhino chassis serves as a basis for many other war machines, and these transports are produced in their thousands – several distinct patterns are in common use throughout the galaxy, with the heavily-armed Deimos being the most widespread amongst the Space Marine Legions. This multipart plastic kit builds one Legion Rhino Transport, in the distinctive Deimos pattern. This efficient transport vehicle has the capacity to carry a 10-man squad of Legionaries across the battlefields of the 31st Millennium, with room for characters to join the unit. Protected from enemy fire by thick armour plating and its defensive smoke launchers, the Legion Rhino Transport is armed with twin-linked bolters, and can be further customised with a range of weapons and utility gear. This kit includes the components to add a pintle-mounted havoc launcher, heavy bolter, heavy flamer, multi-melta, or a combi-weapon with five configurations (bolter, flamer, melta, plasma, or volkite), as well as a searchlight, a dozer blade, and a hunter-killer missile. It also offers a number of cosmetic options, such as towing hooks and a choice of a Space Marine gunner, spotter, or closed hatch. This model has no Legion markings, allowing Warhammer hobbyists to paint it in whichever colours they choose – however, the box includes a transfer sheet with 42 optional markings and iconography for the Sons of Horus and Imperial Fists Legions. This kit comprises 102 plastic components, and is supplied with a Legiones Astartes Vehicle Transfer Sheet. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel paints. You will need a copy of the Warhammer: The Horus Heresy – Age of Darkness Rulebook and either the Liber Astartes: Loyalist Legiones Astartes Army Book or Liber Hereticus: Traitor Legiones Astartes Army Book to make full use of this model. -
Chaplains rouse Space Marines to war with their litanies of faith, and never is this spiritual fortification more vital than amidst the blood and horror of boarding actions and beachhead strikes. Thus, Chaplains are trained to wear formidable Terminator armour so they can fight alongside veteran battle-brothers in the heaviest combat. This multipart plastic kit builds one Space Marine Chaplain clad in durable Terminator armour. This inspiring orator stomps into battle, crushing skulls with a crozius arcanum – his deadly staff of office. In his other hand, he carries either a shell-spitting storm bolter or a massive bone-bedecked relic shield, offering him further protection in battle. The kit also offers the choice of a helmet or a bare head with rebreather, both in the skeletal style of the Chaplains, as well as two different heads for the crozius. This kit contains 25 plastic components, and 1x Citadel 40mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
Termagants are scuttling predators that attack in huge swarms, spitting living ammunition from their symbiotic weapons. Ripper Swarms squirm alongside them as living carpets of teeth and flesh, devouring whatever they come across. This box is the perfect way to start your collection of Tyranids. You’ll get three plastic Termagants, each with a distinct pose, plus a plastic Ripper Swarm, all the paints you need to prepare them for battle, and a paint brush to get you started. These models are push fit, only requiring clippers to assemble – no glue, no mess. Each Termagant is armed with a fleshborer and, like the Ripper Swarm, features vicious claws and teeth. They are posed as though stalking their prey. These miniatures are supplied with appropriate bases. The six Citadel Colour paints are supplied in 12ml pots and feature the essential colours needed to paint the miniatures in the colours of Hive Fleet Leviathan, as well as a Technical paint to create textured bases: - Corax White (Base) - Wraithbone (Base) - Naggaroth Night (Base) - Thunderhawk Blue (Layer) - Magos Purple (Contrast) - Armageddon Dust (Technical) The box also includes a Citadel Starter Brush included to get you painting quickly. -
Equipped with a wide variety of close combat and ranged weapons, the Grey Knight Terminators are teleported into the thick of battle, where they can exterminate their foes quickly and efficiently. These Grey Knights Terminator models feature an array of staggering detail, from the rich iconography, books and skulls through to elegant purity seals, chains, rippled garments, and the personal heraldry upon their shoulder. Their armour-style, whilst clearly that of a Space Marine, suggests a more ancient design influence, and their wide-standing poses indicates the immense power of the Grey Knights. This multi-part plastic boxed set contains 153 components and five 40mm round bases with which to make either a Grey Knight Terminator Squad or a Grey Knight Paladin Squad. There is an array of weaponry and unit upgrades including Nemesis falchions, Nemesis force halberds, a Nemesis Daemon hammer, a Nemesis warding stave, a psycannon, a psilencer and an incinerator. This kit is unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints. -
Amongst the most honoured Space Marines of a Chapter are its Apothecaries. It is their role to to mind the physical well-being of their battle-brothers – this is seen most obviously on the battlefield, where an Apothecary serves as an emergency medic. Their most important duty, though, concerns the dead; an Apothecary can harvest the progenoid organs from a fallen Space Marine, ensuring the creation of further warriors and the continuation of the Chapter. This multi-part plastic kit contains the components necessary to assemble a Primaris Apothecary. Strikingly detailed, clad as he is in Mk X power armour, this miniature features far more accoutrements and gadgets than the standard Primaris Space Marine – as befits his battlefield role. Strung around the chest plate are several canopic jars, bearing purity seals: these are filled with progenoid organs that have passed his scrutiny, and will be used in the creation of further Primaris Space Marines. In his right hand he clutches a freshly-hewn organ upon which his gaze is fixed; another canopic jar hangs from his arm, ready. His left arm holds a narthecium, the grisly instrument of his craft, though this can be replaced with an optional absolver pistol (often the last thing a fallen brother will see…) Adding to the detail and options of this kit are a selection of lamps and surgical inspection lenses, with a chainsaw, injector servo arm, drill and stapler amongst the possible modelling options. As a macabre narrative extra, a slain Space Marine is included with a huge incision made by the Apothecary’s narthecium, to be added to the base. The Primaris Apothecary comes as 28 components, and is supplied with a Citadel 40mm Round base. The kit also includes a Ultramarines-Character Transfer Sheet, which features Captain, Chaplain, Librarian and Lieutenant iconography. -
The Ravenwing Black Knights are the 2nd Company’s greatest warriors, elite fighters who style themselves after the monster-hunting knights of old Caliban. They speed towards the foe, swinging their corvus hammers with such force that the spiked end punctures even the thickest armour. Black Knights are the elite of the Ravenwing. Between their bike-mounted plasma talons and the variety of powerful melee weapons they carry, they're capable of downing enemies many times their size, making them a swift and deadly addition to your collection. This kit is comprised of 122 plastic components with which to make a unit of three Ravenwing Black Knights. It is also supplied with a Dark Angels Transfer Sheet, and 3x Citadel 75mm x 41.5mm Oval Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints. -
A Warhammer Chronicles Omnibus Of all the heroes of the world-that-was, Gotrek and Felix may be the greatest – and this collection of novels and short stories showcases their earliest adventures. READ IT BECAUSE The saga of Gotrek and Felix starts here, with three novels that introduce a host of fan-favourite characters and feature some of the heroic duo's most memorable adventures. DESCRIPTION Gotrek and Felix: unsung heroes of the Empire, or nothing more than common thieves and murderers? The truth perhaps lies somewhere inbetween, and depends entirely on who you ask… Relive the early adventures of the Slayer and his human companion. From the haunted forests of the Empire to the darkness beneath the Worlds Edge Mountains, Gotrek and Felix face demented cultists, sinister goblins and a monstrous troll. In the city of Nuln, they get involved in an invasion by the sewer-dwelling skaven. And in the frozen north, an expedition to the lost dwarf hold of Karag Dum brings Gotrek and Felix face-to-face with a dread Bloodthirster of Chaos… This omnibus contains the first three Gotrek & Felix novels by William King, plus five additional short stories that take the heroic duo into dark adventures in the depths of the Old World. CONTENTS Trollslayer, Skavenslayer, Daemonslayer & Death and Glory by William King A Place of Quiet Assembly by John Brunner Blood Sport by Josh Reynolds Kineater by Jordan Ellinger Mind-Stealer by C L Werner Also includes a Gotrek & Felix Gazetteer, a guide to the characters and locations of the series. -
The Cutting Mat is made of highly durable PVC material and is used as a base for all modeling, assembling and conversions of wargaming miniatures. It will protect your workstation from unnecessary damage. The Cutting Mat is self-healing and comes with cutting/measuring lines for precise cuts.- Self healing 3 layer design with PVC material.
- Includes scale lines measured in millimeters.
- Protects your blades from becoming dull.
- 3mm thick and measures 22x30 cm.
-
Heavy pigment, old paint or a combination thereof: the Mixing Balls will make your paints perfect again. The 5.5 mm stainless steel high-grade Mixing Balls will blend medium and pigment perfectly together, with a few shakes of your paint bottle.- Perfect for Warpaints bottle.
- 5.5mm diameter stainless steel.
- 100x Mixing Balls
- For fast and effortless mixing of paint.
-
The Vehicle brush has a flat stiff end making it perfect for highligting edges on tanks and drybrushing anything from scenery to most vehicles. Also large monsters benefit from this brush where it is used as an enormous drybrush.- Large head for large paintjobs – The Vehicle brush has a flat stiff end making it perfect for highligting edges on tanks and drybrushing anything from scenery to most vehicles.
- Ideal for texturing – The synthetic nylon bristles on this brush are coarser than on our smaller brushes, making this a very good brush for drybrushing large models and terrain pieces, where texture means more than refined detail.
- Comfortable ergonomic grip – We have given our larger brushes a full round handle to allow for a looser grip when doing broad strokes across your favourite models.
- European quality – All our brushes are handmade and quality checked in Germany to ensure the best possible quality. The brushes have ferrules made of strong, rust-resistant nickel that prevents corroding and rotting.
