-
Outrider Squads rove in advance of the main Space Marine lines, guarding flanks of larger formations or hunting down enemy infiltrators. When battle is joined, they conduct lightning-fast hit-and-run attacks on defended positions, and run down those who would try to escape the vengeance of their Chapter. Look no further than the aptly named Outriders to roar ahead of your main army and take the fight to the enemy vanguard from the outset, or to sweep around your opponent’s flanks and encircle their forces. This set is supplied in 40 plastic components and also contains 3x Citadel 90mm Hex Holed Oval Bases. The miniatures are push-fit, so require no glue to assemble. A Primaris Space Marines Transfer Sheet is also included. -
Before the molten ire of an Eradicator Squad, heavy armour and defended positions stand little chance. Eradicators wear the heavier Gravis pattern of Mk X power armour, allowing them to stride unharmed through waves of incoming fire before bringing their own destructive weaponry to bear at close range. Completely eradicate anything that stands against you with these destructive warriors. Each member of the squad can be armed with a melta rifle or a heavy melta rifle and one can be alternately armed with a multi-melta. There is also the option to make one of the squad into a sergeant. There are 20 heads in the kit, along with a range of other various accessories. This 122-part plastic kit makes three Eradicators and is supplied with three 40mm Citadel round bases. It is also supplied with an Ultramarines Infantry transfer sheet. -
With pinpoint accuracy, the Gladiator Lancer picks off the heaviest enemy armour, the laser destroyer punching smouldering holes in their hulls. Such is the range of its heavy cannon that it can eliminate threats to the Space Marines before they encounter them, storming past burning wrecks to claim their objectives. Like the Predator is to a Rhino, the design of the Gladiator is based upon that of an Impulsor’s chassis, and has been designed to serve as a front line battle tank rather than a transport vehicle. If you're looking to shore up your batteline while offering some formidable fire support, a Gladiator will fit the role perfectly! The Lancer-pattern Gladiator is armed with a turret-mounted laser destroyer, making it the perfect choice for obliterating monsters, tanks or other high-value targets from extreme range. This set is supplied in 157 plastic components and also contains 1x Citadel 100mm Round Base and 1x Clear Tank Hover Stand. A Primaris Vehicle Transfer Sheet is also included. This kit can alternatively be used to assemble a Gladiator Valiant, Gladiator Reaper or an Impulsor. -
Primaris Techmarines stride selflessly through oncoming fire to soothe the machine spirits of wounded war engines, deftly peeling back damaged armour plates to repair burnt-out cabling and bending warped panels back into shape with their servo-arms and mechadendrites. Techmarines specialise in repairing tanks and war machines, so if you favour armoured warfare, never leave home without a Techmarine or two in order to keep them in tip-top shape! This kit builds one Primaris Techmarine. He is equipped with a grav-pistol, Omnissian power axe, servo-arm, mechadendrite, and a shoulder-mounted forge bolter. It is supplied in 24 plastic components and comes with a Citadel 40mm Round Base. -
Sentinels are all-terrain bipedal vehicles, employed by the Astra Militarum to patrol rough ground or deploy rapid-response firepower. Armoured Sentinels are modified with extra protective panelling, making them superb front-line hunters. Carrying deadly heavy weapons into warzones too dense for battle tanks, these mobile hunter-killers excel in destroying vehicles, fortified bunkers, and xenos monstrosities. This multipart plastic kit builds one Armoured Sentinel – a light walker toting heavy firepower on an sturdy frame. There are loads of options in the kit, allowing you to arm your Sentinel for any battlefield role with an autocannon, heavy flamer, missile launcher, multi-laser, or plasma cannon. You can additionally equip your walker with a poseable Sentinel chainsaw for more melee punch, and a hunter-killer missile for extra firepower. You'll also find plenty of cosmetic options, including a searchlight and smoke launchers, stowage and spare equipment racks, and extra fuel canisters. This kit can alternatively build a Scout Sentinel with an open cockpit, which trades durability for extra speed in warzones where mobility is essential. This kit comprises 91 plastic components and is supplied with 1x Citadel 80mm Round Base. Also included is an Astra Militarum Vehicle Transfer Sheet, with 475 transfers featuring numerals, sigils, and a variety of regimental heraldry. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
While massed infantry can overwhelm the foe, it often falls to Heavy Weapons Squads to deliver the killing blow. These teams of gun crews swiftly set up their mobile heavy weapons as their comrades advance, providing the firepower to bolster battle lines. With access to an arsenal of portable armaments, they can offer close fire support with adaptable loadouts of precise – or indiscriminate – firepower. This multipart plastic kit builds three Heavy Weapons Teams – paired infantry soldiers crewing a portable gun. Each team can be armed with your choice of a heavy bolter, missile launcher, mortar, autocannon, or lascannon. The kit includes plenty of cosmetic options to mix things up – extra ammo, seven different heads, a variety of poses, and equipment such as vox-sets and magnoculars for spotters and loaders – so no two teams ever need look alike. These teams can be fielded together as Heavy Weapons Squads, or combined with the Cadian Shock Troops kit to form Infantry Squads with attached Heavy Weapons Teams. This kit comprises 127 plastic components, and is supplied with 3x Citadel 50mm Round Bases. Also included is an Astra Militarum Infantry Transfer Sheet, with 597 transfers featuring numerals, squad markings, and Cadian regimental heraldry. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
The Leman Russ is the primary battle tank of the Imperial Guard, forming the spearhead of countless armoured columns. Those enemies that do not fall to the bombardment of their cannons and numerous hull-mounted guns are crushed mercilessly beneath their heavy treads. These reliable and formidable tanks can be found in nearly every Astra Militarum regiment in the galaxy, and have become synonymous with the Imperium's fury. This multipart plastic kit builds a Leman Russ Battle Tank – a versatile armoured vehicle with a wide range of variants. This tank can be built with one of seven powerful turret weapons – a battle cannon, demolisher battle cannon, eradicator nova cannon, executioner plasma cannon, exterminator autocannon, punisher gatling cannon, or vanquisher battle cannon – allowing you to arm your Leman Russ for busting open tanks, shredding alien swarms, or anything in between. It also sports a hull-mounted secondary weapon – a lascannon, heavy bolter, or heavy flamer – and can be equipped with two optional sponson-mounted guns – a pair of heavy bolters, heavy flamers, multi-meltas, or plasma cannons. The kit includes cosmetic options such as a searchlight, handles, and a choice of an exposed crewman or closed hatch. It can alternatively build a Tank Commander – a skilled squadron officer for the Astra Militarum, mounted in a Leman Russ. This kit comprises 150 plastic components and includes an Astra Militarum Vehicle Transfer Sheet, with 475 transfers featuring numerals, sigils, and a variety of regimental heraldry. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
Possessed are bestial slaughter incarnate – Astartes warriors merged with fell daemons of the Chaos Gods in a blasphemous union. Warped and mutated by their empyric parasites, the armoured forms of the Possessed flow like wax, shrugging off lethal blows as they manifest talons, snapping maws, and vestigial wings to unleash an unholy orgy of bloodshed. This multipart plastic kit builds five Possessed, monstrous close combat fighters who bear a host of repulsive mutations, from claws and tentacles to bladed limbs. Each model comes with a variety of cosmetic choices – including alternative heads, daemonic limbs, interchangeable backpacks, and other accessories – to ensure that no two models look the same, even within larger units or multiple squads of half-daemon monstrosities. The kit also includes an optional Chaos icon, for a Possessed Champion to invoke the dark blessings of the Ruinous Powers. This set comprises 56 plastic components and is supplied with 5x Citadel 40mm Round Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints. -
Possessing deadly long-ranged weaponry, Wraithguard are constructs made from wraithbone, imbued with the spirit stones of dead Aeldari. The Wraithguard can be equipped with a wraith cannon, or a D-scythe to banish foes into the warp. This multi-part plastic kit contains 135 components and an Aeldari Transfer Sheet with which to make five Aeldari Wraithguard or Wraithblades. This kit comes supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints. -
High in the mountains of Shyish, the Realm of Death, a desperate battle plays out between the Stormcast Eternals of Xandire's Truthseekers and the Soulblight vampires of the Crimson Court. Both warbands seek the treasures of the Crypt Noctis, imbued with arcane might that could see the forces of Nagash dominate the realm forever more. Will the champions of the Stormcast Eternals prevail under the leadership of Calthia Xandire, or will the Soulblight Gravelords of Prince Duvalle gain the untold necrotic power they seek? As powerful warriors clash in epic combat, your games will decide the fate of Shyish! Warcry is a fast-paced skirmish game between two battling warbands, set in the fantastical realms of Warhammer Age of Sigmar. This boxed set contains everything you need to get started, including two full warbands and scenery to fight over – the noble Stormcast Eternals of Xandire’s Truthseekers, and the fiendish Soulblight vampires of the Crimson Court. The box contains a double-sided folding game board, a set of scenery pieces, tokens, dice, a range ruler, and a Crypt of Blood booklet with rules, lore, and scenarios to get you started. This boxed set contains: - 72-page softcover Crypt of Blood book – a guide to getting started with Warcry, including the core rules of the game, full rules for both warbands, plus lore, artwork, and battleplans to play through - 8x plastic push-fit miniatures, including: – Xandire’s Truthseekers – four warriors of the Stormcast Eternals, heroes all. These push-fit miniatures are cast in noble blue plastic, can be assembled without the need for glue, and include scenic bases – The Crimson Court – four sinister vampires, each graceful, fast, and utterly deadly. These push-fit miniatures are cast in blood red plastic, can be assembled without the need for glue, and include scenic bases - Crypt of Blood Scenery – six pieces of plastic terrain depicting a ruined crypt in Shyish, the Realm of Death - A double-sided 22" x 30" folding gaming board, depicting a desolate snow-covered ruin - 10x warband cards, including 2x ability cards, 4x fighter cards for Xandire’s Truthseekers, and 4x fighter cards for The Crimson Court - 18x dice, 63x card tokens, and a range ruler Crypt of Blood is a fantastic way to start playing games of Warcry quickly, with two balanced warbands, and includes everything you need to get started. These push-fit miniatures can be assembled without glue, and are supplied unpainted – we recommend using Citadel Colour paints. -
The Pale Harvestmen; the Scythes of Nurgle; the Eyes of Mortarion. The elite warriors of the Deathshroud go by many names, and every one is redolent with a miasma of fear and menace. Swollen with unnatural power, the Deathshroud tower over their enemies. Rusted gauntlets and squirming tentacles clutch huge battle scythes known as manreapers, cursed weapons that slice heads from shoulders and limbs from torsos with every swing. Clouds of plague flies boil around the Deathshroud, while vile smog spills from vents in their armour to choke and blind their foes. This multi-part plastic kit contains the components necessary to assemble a set of 3 Deathshroud Bodyguard. Impressively large and dense, covered in rot, decay, tentacles and horror, these models exemplify the corrupting gift that Nurgle imparts. Each is armed with a manreaper – a large scythe, pitted and pockmarked with rust and disease, it stands even taller than the Deathshroud who brandish it – and a plaguespurter gauntlet, used to squirt unpleasant maladies at the unfortunate. Each of the three is bedecked with Nurgle symbolism, found in the rust, boils and chips in their armour, through which vile tentacled and bloated flesh poke, barely covered by ragged cloaks. there are 7 variant heads included, a mix of helmeted and bare, and an extra plaguespurter gauntlet – this is for an optional unit Champion, who has the option of wielding two of these. The Deathshroud Bodyguard come as 51 components, and are supplied with 3 Citadel 40mm Round bases. -
Labouring through the air on buzzing turbines and driven by the trapped essence of a Nurgle Daemon, the Foetid Bloat-drone drifts toward the enemy like an armoured plague fly. This hideous war engine bears monstrous weapons onto the battlefield to annihilate the enemies of the Death Guard. Clad in rusting plates of rot-iron armour, their hulls overflowing with flabby foulness, Foetid Bloat-drones can withstand ferocious amounts of punishment and still keep fighting. They are designed to hover in close, drifting lazily through the most treacherous of terrain to provide supporting fire. This multi-part plastic kit contains the components necessary to assemble a Foetid Bloat-drone. A huge, intimidating amalgamation of machine and rotting meat, the front of the model is dominated by a carapace which can be assembled as 1 of 3 options – one featuring a Nurgle symbol picked out in skulls, one featuring the symbol carved into the carapace, and one featuring a hideous toothed maw covered in pustules, tentacles and hoses dangling from within. It comes armed with 2 plague spitters and a plague probe; whichever carapace you pick, the plague spitters can be replaced with either a heavy blight launcher or a flesh mower (which looks as utterly ghastly as it sounds…) The back of the model is a riot of horrendous detail, with obscenely stretched skin spilling over the metal structures that barely contain it The kit comes as 44 components, and is supplied with a Citadel 60mm Round base. -
Sale!
The Har Kuron Hurricane has descended on the Gnarlwood, and Gryselle the Slaughterer leads her band of gladiators on a mission of sanctified murder to hone their skills. The Arenai are masterful warriors, each a veteran of countless mortal duels – but they are also peerless performers, their acrobatic leaps and dazzling flourishes making every act of carnage a prayer to their bloody god. Gryselle’s coterie of killers each has her own speciality – Retaria vaults across the battlefield while Kalexis launches lightning-fast attacks with her bladed armour. Thrialla uses a barbed whip to toy with her victims, as Traxya punishes each misstep made by her opponent with her blade and buckler. Gryselle's Arenai are an aggressive warband seeking to drown the Gnarlwood in blood. Thanks to their persistent Flourish ploys and deadly Combo attacks, these fast-moving aelves can put out a huge amount of damage while nimbly dancing away from any reprisals. This set includes a full Rivals deck to use straight out of the box, and the models are all push-fit – so you can get playing nice and quick. This set includes: – 5x push-fit Gryselle's Arenai miniatures – no glue required to assemble, cast in bloody red plastic to stand out even when unpainted – 5x double-sided fighter cards, one for each warrior in the warband – Gryselle the Slaughterer, Retaria the Entangler, Kalexis the Silvered Blur, Thrialla the Lash, and Traxya the Aegis – 1x Gryselle's Arenai Warband Background / Rivals Deck Card A 32-card Rivals deck consisting of: – 12x Gryselle's Arenai objective cards – 10x Gryselle's Arenai gambit cards – 10x Gryselle's Arenai upgrade cards Miniatures in this box are supplied unpainted and require assembly – we recommend using Citadel Colour paints. -
Cutters are fast, agile jetbikes, reflecting House Escher's preference for deadly speed over brutish durability. Borne across the skies of the ash wastes by a staggeringly powerful engine, Cutters are seldom the stablest or safest of rides – but leave any rivals choking on clouds of dust and trails of corrosive chem-exhaust. Soaring over obstacles and barricades, a descending Cutter can slice through the enemies of the House of Blades with a hail of gunfire, then jink away before the foe can respond. This multipart plastic kit builds four Escher Cutters, lightning-fast jetbikes that can be added to any Escher gang. These ferocious flying machines boast a powerful front turbine with exposed engine cylinders, providing thrust for their sleek, bladed chassis. Each Cutter has a deadly gas trap launcher installed on its undercarriage, and sports a pair of mounted weapons on either side of the jetbike – you can choose between twin-linked grenade launchers, twin-linked heavy stubbers, or twin-linked plasma guns. The kit includes a choice of two different head designs and four interchangeable hairstyles, to give each of your Escher riders their own distinct appearance. This set consists of 124 plastic components, and is supplied with 4x Citadel 60x35mm Oval Bases, each with a ball top flying stem. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. Rules for using Escher Cutters in your games of Necromunda can be found in The Aranthian Succession: Cinderak Burning supplement. -
In the long-lost world-that-was, Gotrek Gurnisson was a monster slayer without peer. Seeking a valiant death to atone for a mysterious sin, he travelled the world, his poet companion Felix by his side, seeking the mightiest doom he could find. When the End Times came, Gotrek finally met his fate – guarding the gates of the Realm of Chaos against all the Daemonic servants of the Dark Gods. Now, spat into the Mortal Realms, he seeks new purpose, the last dwarf in a world of duardin and other strange creatures. Armed with the legendary Fyreslayer axe Zangrom-Thaz and bearing the Master Rune of Krag Blackhammer, he has become a veritable demigod of battle. Gotrek makes a fearsome addition to Order armies. His skill with the mighty axe Zangrom-Thaz makes him (as you would expect) a superlative monster hunter, and a threat to any Hero – even the largest beasts of the Mortal Realms should beware the Slayer's wrath. If, by some chance, anyone survives to hit him back, the Shoulder Plate of Edassa will guard against their blows. Basically, if you want a Hero who will kill everything in his path, you want Gotrek. Gotrek Gurnisson is a plastic kit supplied in 15 components. He comes with two options for bases – a 32mm round base for using him in your games, and a 40mm round base with scenic detailing depicting dead Skaven, scattered weapons, discarded shields, and splintered wood – perfect for a display model worthy of Golden Demon! You'll find a warscroll for Gotrek in the box, allowing you to use him in your games of Warhammer Age of Sigmar. -
Syll Lewdtongue has inspired thousands of warlords to acts of tyranny and misrule, but since uniting their powers with the megalomaniacal Daemon monarch Esske, the Herald of Slaanesh has become a force of conquest like no other. Combine the might of a Daemon Prince and the cunning of a Herald of Slaanesh, and you get Syll’Esske – a terrifying tag-team skilled at carving a bloody path across the battlefields of Warhammer 40,000 and Warhammer Age of Sigmar alike. Capable of piling in and attacking twice, Syll’Esske is fantastic as a front-line combatant, as well as being armed with an arsenal of support abilities that’ll empower the Daemons they fight alongside. This kit is supplied in 20 plastic components, and includes 1 x 50mm round base. -
Aetheric Navigators are an invaluable presence on any Kharadron skyvessel, masters of the guiding winds who use cutting-edge aethermatic science to decipher the ever-changing wind patterns of the Mortal Realms. These aero-cartographers employ arcane instruments to read patterns both meteorological and magical, plotting the optimal course for allied skyvessels and disrupting hostile flows of sorcerous power. This multipart plastic kit builds an Aetheric Navigator, a duardin wayfinder of arcane insight. He strikes a dramatic pose, clutching his zephyrscope and peering into an analytical gadget with a ranging pistol at his hip. The Navigator's sealed suit is covered head to toe in other devices used to gauge the aeronautical conditions and guide skyvessels to their goal – including magical lenses, filters, map cases, a sextant, and an anemometer mounted on his backpack. He's a striking example of Kharadron science and ingenuity. This kit comprises 10 plastic components, and comes with a Citadel 32mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
Endrinriggers are daring sky-mechanics, floating alongside a Kharadron airfleet in order to conduct vital field repairs on damaged ships. Carried aloft by the personal aether-endrins strapped to their backs, these steely-nerved duardin have no problem with putting their aether-powered tools to violent use when danger approaches, riddling foes with red-hot rivets or slicing through armour and bone with whirring sawblades. This multipart plastic kit builds three Endrinriggers – flying duardin tasked with skyvessel repairs. Each Endrinrigger is armed with a rapid-fire rivet gun and an aethermatic saw, mechanical tools that can take apart enemies as easily as ship hulls. One Endrinrigger can instead be armed with an aethermatic volley gun, and another can be armed with a choice of skyhook, drill cannon, or grapnel launcher. There's also a unique head to mark out a Mizzenmaster champion. This kit offers a boatload of customisation options – three different designs for heads, saws, and guns that can be combined as you see fit, as well as interchangeable aether-endrins, rigs, backpacks, and rudders. There's also a selection of cosmetic tools to hang from belts and bandoliers, allowing you to build a varied team of Endrinriggers. This kit can alternatively build three Skywardens, pike-wielding airborne Arkanaut warriors. This kit comprises 88 plastic components and comes with 3x Citadel 32mm Round Bases, as well as 3x flying stems of differing heights – 30mm, 32.5mm, and 35mm. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
Eightbound are Heretic Astartes possessed by eight separate daemons of Khorne, their swollen forms virtually unrecognisable from the World Eaters they once were. As a result, these warped warriors exhibit unthinkable strength and savagery, far in excess of their mortal brethren. Wielding all manner of enormous chain weapons, a pack of Eightbound are capable of ripping apart almost anything that dares to stand against them. This multipart plastic kit builds three Eightbound – shockingly potent demi-daemons fielded by the World Eaters. These monstrous warriors resemble warped, overgrown Khorne Berzerkers, from their exposed muscles and cybernetics to their ornate and twisted armour. Each Eightbound is armed with two eviscerators, massive chain weapons resembling chainswords or chainaxes. You can also build an Eightbound Champion, who can instead be armed with a pair of cleaver-like lacerators, or a two-handed heavy chainglaive. The kit is loaded with interchangeable and cosmetic components, including alternate heads, different designs for chest plates, shoulder pads, and power packs, the ability to mix in more mutated parts, and the option to build your Eightbound with bare torsos. There's enough variety to make each Eightbound pack unique, and fill your bits box with extras. This kit can alternatively build three Exalted Eightbound, an even more heavily-mutated squad of World Eaters. This kit comprises 88 plastic components – a truly auspicious number – and is supplied with 3x Citadel 40mm Round Bases. Also included is a World Eaters Transfer Sheet, with 200 transfers featuring Khornate symbols, runic tattoos, eight-pointed stars, skulls, and variations on the World Eaters Legion icon. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. -
Rough Riders are potent cavalry troops fielded by the Astra Militarum – the most famous of which are recruited from the steppes of Attila. Their combat skill and sheer mobility makes these horsemasters a powerful force, whether spearheading an attack or outflanking the foe. When the moment comes to launch a charge, the Rough Riders plunge their hunting lances into the foe and detonate the deadly tips, lending an explosive impact to the assault. This multipart plastic kit builds five Attilan Rough Riders. These rugged warriors are mounted on horses loaded with battlefield gear, from flasks and bedrolls to holstered laspistols and saddle-slung lasguns. Each Rough Rider wields an explosive hunting lance, which can be built with an infantry-shredding frag tip or tank-busting melta tip. One Rough Rider can also be built with an electrical goad lance, and the kit includes components to assemble a Rough Rider Sergeant with a choice of two plumed heads and an optional power saber – brandished for the attack, or sheathed at the hip. There are loads of cosmetic choices and interchangeable options to make each squad of Rough Riders your own – you'll find different lance-wielding arm poses, a huge variety of multipart heads, and a host of front and rear bandoliers, laden with items like grenades, pouches, and a curved Attilan dagger. This kit comprises 122 plastic components, and is supplied with 5x Citadel 60x35mm Oval Bases. Also included is a Cadian Infantry Transfer Sheet with 597 transfers, and an Astra Militarum Vehicle Transfer Sheet with 475 transfers from a variety of regiments. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
